2015 Ford Fusion
Mileage
107,808
Service Date
7/3/2024
Services Performed
- VERIFY CONCERN. BRAKE LIGHTS ARE ON. USED SCANNER TO PULL CODES. CODE P1703-00 BRAKE SWITCH OUT OF SELF TEST RANGE. C0040-64 BRAKE PEDAL SWITCH "A" SIGNAL PLAUSIBILITY FAILURE. PERFORMED DIAGNOSE. CHECKED POWER AND GROUND AT BRAKE PEDAL SWITCH CONNECTOR. POWER AND GROUND. TEST SWITCH. SWITCH FAIL TEST. RECOMMEND TO REPLACE BRAKE PEDAL SWITCH AND RE- TEST.
- PERFORMED OIL AND FILTER CHANGE.
- Checked and topped off engine fluid levels, checked and adjusted tire pressures. front brakes at 8mm. rear brakes at 7mm. front and rear tires at 7/32". recommend engine air filter. cabin air filter. throttle body service. maf service. spark plugs. drive belt and drive belt tensioner.
- REMOVED BRAKE PEDAL SWITCH CONNECTOR. REMOVED SWITCH. INSTALL NEW SWITCH. CLEARED CODES. RE- TEST. BRAKE LIGHTS WORKING AS DESIGNED AT THIS TIME.
- REMOVED ENGINE COVER. REMOVED SPARK PLUG COIL CONNECTORS. REMOVED SPARK PLUG COIL. REMOVED SPARK PLUGS. INSTALL NEW SPARK PLUGS. RE-INSTALL ALL RELATED COMPONENTS.
- REMOVE THROTTLE BODY, ( AS NEEDED ) CLEAN CARBON BUILD UP FROM THROTTLE PLATE, RE INSTALL THROTTLE BODY WITH NEW GASKET ( WHEN THROTTLE BODY IS REMOVED ), ADJUST IDLE PARAMETERS WHERE APPLICABLE
- REMOVED GLOVE BOX. REMOVED CABIN AIR FILTER. COVER. REMOVED CABIN AIR FILTER. INSTALL NEW FILTER. RE-INSTALL ALL RELATED COMPONENTS.
- The ozone treatment cleans and treats evap removing bacteria, fungi, pollen, mold and dust mites. removes smells and keeps evap system working effectively clean.
- REMOVED AND REPLACED ENGINE AIR FILTER.
- REMOVED RH FRONT ENGINE MOUNT. REMOVED DRIVE BELT. IDLE PULLEY. REMOVED DRIVE BELT TENSIONER. INSTALL NEW IDLE PULLEY. NEW DRIVE BELT TENSIONER. NEW DRIVE BELT. RE-INSTALL ENGINE MOUNT.
Bill M. gave our service a 5 star review on 7/3/2024
